What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 08:10

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Edit 2024–10.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
In schematic diagrams this is the symbol for a fuse:
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
These are simplified answers to the original question, and does not change anything I wrote above.
The bolt then partially travels down the line to your home.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
First Sentence:
The third is lightning and “how it gets conducted into a home.”
so, what happens?
It also is a device that limits the change in current flow.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
There are two important concepts here.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
[image of Common-mode choke]
The other is “what does a “fuse” do?”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Should I become an interior designer or not in today's world?
At least they know the answer if they wanted it.
He then describes the function of a fuse.
This one hit behind the barn.
I post the exact comment here.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–14 [Omar Gharbi Omar Gharbi ]
What is Alan Kay’s view on analytic idealism by Bernardo Kastrup?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
a photo is worth a thousand words.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
One is “what exactly is in a ‘surge protector’ ? ”
Andrew Tate or Nas Daily, who do you prefer more?
but this device (an Inductor) … impedes the rapid changes in the current.
But… the neutral is now “floating” because of the 1 ohm resistance.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
How does an experienced gay/bi guy handle a bi-courius guy on his first time?
Barnstars:
(Dc diagram shown, AC is similar).
the problem then depends on "how fast does the fuse operate?".
Procter & Gamble to Cut 7,000 Jobs - WSJ
eight
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
[old diagram got deleted by accident]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Here is a simplified AC power diagram.
One
This is 'the assistant's answer'
For this case there are devices called Metal oxide varistors (MOV).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It seems Mohan does not understand the difference between a comment and an Answer.
He then asserts :
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–10[John johnson John Johnson ]
An AC voltage/ current source, and an ac inductive load.
Upvotes:
A circuit breaker is similar, but is resettable.
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The MOV will conduct when the voltage exceeds 50% of line voltage.
What is lightning?
This device then solves the entire problem.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is where the MOV conducts again, and dissipated the energy.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
what exactly is a ‘surge’ protector?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
What does a fuse do?
But it can get overloaded, and no longer works.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–16 [ OO OLAOYE OYEBODE ]
There are three different concepts here that are getting confused.
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then describes Rainy Season and Lightning.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
A fuse is a non-resetable over current circuit protector.
but I think this circuit , shows a few more pieces.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
These devices are installed between the “hot” and “neutral” and protective ground.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
nine